Air Cooling Heatsink for Disc type thyristor & rectifier diode

Air Cooling Heatsinks for single- and double-sided cooling disc type power SCR thyristors and rectifier diodes during their operation.

Heatsinks are used for semiconductor devices for currents from 100A to 6300A and voltages VDRM/VRRM up to 7000V.

Heatsinks are used for disc (tablet type) semiconductors with сontact surface diameter from Ø19 mm to Ø100 mm.

Features: natural air cooling and forced air cooling; corrosion-resistant aluminum alloy; low thermal resistance; easy installation with a mounting slot; can be either standard models can also be customizing.

For minimum electrical losses and maximum heat dissipation of the devices, the appropriate mounting force Fm specified in the power device specifications must be observed.

Current range of disc type SCR thyristors and rectifier diodes for which air heat sinks (coolers, radiators) are used: 100A, 150A, 160A, 200A, 250A, 300A, 320A, 400A, 500A, 600A, 630A, 800A, 1000A, 1250A, 1500A, 1600A, 2000A, 2500A, 3000A, 3200A, 4000A, 5000A, 6000A, 6300A.

Heat sinks are made of aluminum radiator profiles and do not require additional protective coating when used in different climatic conditions.

Assembly of semiconductor devices (power diodes, thyristors) of tabular design with coolers is done by clamping bolts and traverse.

The contact surfaces of the heatsink and power device must have low roughness and flatness deviations.

Before mounting the contact surfaces of the heatsink, current contact and semiconductor device should be wiped with a cloth soaked in alcohol (toluene, benzene, acetone) and it is recommended to lubricate with a thin layer of silicone-organic heat transfer paste (this is a recommendation and is not a prerequisite for installation).

Specifications and parameters, dimensions, drawings of air-cooled heat sink (radiator) are listed below.

Our company provides a quality guarantee for air cooling heatsink of 2 years from the date of purchase. When supplying heatsinks, if necessary, we provide technical passport.

Read more

The final price of air cooling heatsink depends on the quantity, delivery terms, manufacturer, country of origin and form of payment.

Air Cooling Heatsinks for disc type power semiconductors

Type Contact surface diameter Power dissipation with natural cooling
(PF)
Thermal resistance Rth(h-a) Flow resist. ΔPh Mounting force Fm, max Cooling surface area Weight Outline, dimensions B×L×H Applies to devices for current
natural cooling forced cooling (airflow Vcfh=6 m/s)
mm W °C/W °C/W Pa kN cm2 kg mm
Heatsink O123
O123
Ø22 120 0.710 0.212 20 8 ± 1.5 - 2.0 Outline Heatsink O123150×100×122 100A - 500A
Heatsink O143
O143
Ø42 120 0.500 0.125 30 15 ± 1.5 3656.9 3.0 Outline Heatsink O143185×150×125 200A - 2000A
Heatsink O243
O243
Ø42 220 0.280 0.080 30 15 ± 1.5 5957.2 5.8 Outline Heatsink O243230×150×170 200A - 2000A
Heatsink O343
O343
Ø42 220 0.355 0.100 30 15 ± 1.5 5957.2 5.3 Outline Heatsink O343230×150×150 200A - 2000A
Heatsink O153
O153
Ø55 220 0.260 0.075 30 26 ± 2 5957.2 6.0 Outline Heatsink O153230×150×176 500A - 6300A
Heatsink O253
O253
Ø55 220 0.355 0.100 30 26 ± 2 5957.2 5.5 Outline Heatsink O253230×150×156 500A - 6300A
Heatsink O173
O173
Ø76 400 0.195 0.060 35 50 ± 10 - 12 Outline Heatsink O173265×250×225 1000A - 6300A
Heatsink O273
O273
Ø76 500 0.166 0.047 40 50 ± 10 - 13 Outline Heatsink O273280×250×195 1000A - 6300A
Heatsink O193
O193
Ø100 650 0.107 0.030 50 80 ± 10 - 28 Outline Heatsink O193385×300×305 1600A - 6300A

Application of air cooling heatsinks for disc type semiconductors

Type Contact surface diameter Applied device housing Applies to devices for current Application
package type
Application
diode, thyristor type
сontact surface outside diameter
O123 Ø22 Ø19-Ø22 Ø42 100A - 500A PD21, PD22, PD23, PT21, PT21-1, PT23 DL123, T123, T223, T323, TFI323
O143 Ø42 Ø25-Ø38 Ø42-Ø60 200A - 2000A PD32, PD42, PD43, PD44, PT31, PT32, PT41, PT42, PT43, D.B1, D.B2, D.C2, T.B2, T.B3, T.C1, T.C2, T.C3 D133, D233, D143, D243, T133, T233, T333, T433, T933, TF133, TF233, TF333, TF433, TF833, TF933, TFI133, TFI233, TFI333, TFI433, TFI533, TFI833, TFI933, T143, T243, T343, T443, T643, T743, TF143, TF243, TF343, TF943, TFI143, TFI243, TFI343, TFI443, TFI543, TFI643
O243 Ø42 Ø25-Ø38 Ø42-Ø60 200A - 2000A PD32, PD42, PD43, PD44, PT31, PT32, PT41, PT42, PT43, D.B1, D.B2, D.C2, T.B2, T.B3, T.C1, T.C2, T.C3 D133, D233, D143, D243, T133, T233, T333, T433, T933, TF133, TF233, TF333, TF433, TF833, TF933, TFI133, TFI233, TFI333, TFI433, TFI533, TFI833, TFI933, T143, T243, T343, T443, T643, T743, TF143, TF243, TF343, TF943, TFI143, TFI243, TFI343, TFI443, TFI543, TFI643
O343 Ø42 Ø25-Ø38 Ø42-Ø60 200A - 2000A PD32, PD42, PD43, PD44, PT31, PT32, PT41, PT42, PT43, D.B1, D.B2, D.C2, T.B2, T.B3, T.C1, T.C2, T.C3 D133, D233, D143, D243, T133, T233, T333, T433, T933, TF133, TF233, TF333, TF433, TF833, TF933, TFI133, TFI233, TFI333, TFI433, TFI533, TFI833, TFI933, T143, T243, T343, T443, T643, T743, TF143, TF243, TF343, TF943, TFI143, TFI243, TFI343, TFI443, TFI543, TFI643
O153 Ø55 Ø42-Ø51 Ø60-Ø75 500A - 6300A PD50, PD53, PD54, PT51, PT53, PT53-1, PT54, PTO54, D.D2, T.D1, T.D2, T.D5 D153, D253, DL153, T153, T253, T353, T453, T553, T653, T753, T853, T953, TF153, TF253, TF453, TF553, TF953, TFI153, TFI253, TFI353, TFI453, TL253
O253 Ø55 Ø42-Ø51 Ø60-Ø75 500A - 6300A PD50, PD53, PD54, PT51, PT53, PT53-1, PT54, PTO54, D.D2, T.D1, T.D2, T.D5 D153, D253, DL153, T153, T253, T353, T453, T553, T653, T753, T853, T953, TF153, TF253, TF453, TF553, TF953, TFI153, TFI253, TFI353, TFI453, TL253
O173 Ø76 Ø60-Ø75 Ø85-Ø112 1000A - 6300A PD63, PD73, PT63, PT73, D.F1, D.F3, T.F1, T.F2, T.F5 D163, D173, T163, T263, T663, TFI163, TFI263, T173, T273, T373, T673, TF173, TF273, TFI173, TFI273, TFI373, TFI473, TFI573, TFI673, TFI773, TFI873
O273 Ø76 Ø60-Ø75 Ø85-Ø112 1000A - 6300A PD63, PD73, PT63, PT73, D.F1, D.F3, T.F1, T.F2, T.F5 D163, D173, T163, T263, T663, TFI163, TFI263, T173, T273, T373, T673, TF173, TF273, TFI173, TFI273, TFI373, TFI473, TFI573, TFI673, TFI773, TFI873
O193 Ø100 Ø80-Ø100 Ø120-Ø150 1600A - 6300A PD83, PD93, PT83, PT93, PT94, PTT94, PTO95, D.G1, T.H1, T.G5 D183, D193, T183, T283, T383, T583, T683, TFI183, T193, T293, T393, T693, TFI193

Part Numbering Guide for air cooling heatsinks:

O 1 5 3 150
O Product group: Heatsinks for semiconductors.
1 Serial number of heatsink design modification.
5 Series coding by contact surface diameter for disc type heatsinks.
3 Serial number of the heatsink design modification for devices: 1 - disc design with double-sided cooling.
150 Length of the heatsink, mm.

High Power Semiconductors AS ENERGITM

Our company is engaged in the manufacturer and sale of wide range of power semiconductors (power thyristors, modules, rectifier diodes, avalanche, rotor and welding diodes, triacs etc.) currents up to 15000A and voltages to 9000V, and air and water heatsinks to them.
You can buy semiconductor devices in any volumes, and when ordering large lots, the price will be lower. We have earned the trust of customers and supply products all over the world.

For questions regarding the acquisition of Power Thyristors, Diodes, Modules send an email request to:

[email protected]

And we will provide you a commercial offer for delivery.
For a large number, we will provide an individual price!!!

We are open to manufacture products at our production facilities
according to your requests and technical task.


Photo Gallery

The photo gallery shows many different semiconductor devices, semiconductor chips and SCRs produced by AS ENERGITM, examples of test reports.


Photo of Air Cooling Heatsinks for disc type semiconductors:


Recommendations for assembling a disc thyristor with an air heatsink:

Assembling disc thyristor with a heatsink

The reliability of heat transfer and electrical contact between the mating surfaces of the thyristor and the cooler over the entire temperature range is ensured by mounting torque (clamping force).

Before assembly you should perform visual inspection (1) contact surfaces for mechanical damages and wipe (2), soaked with alcohol (toluene, gasoline, acetone).

After inspection, fix the current contacts (leads), install a pin to fix the alignment of the structure.

To improve the parameters of heat transfer it is recommended to lubricate (3) a thin layer of silicone thermal conductive paste before the assembly (this is a recommendation and is not a prerequisite for installation).

Install the thyristor (3), the second part of the cooler, the fiberglass insulator and the thrust washer.

To thread the traverse (4) and evenly tighten the nuts. Make sure no misalignment and evenness of the contact surfaces.

When the parts are sufficiently clamped but moveable, we recommend placing the cooler on a flat surface and checking the tolerance for parallelism of the overall adjacent plane of the surfaces (5).

Clamp each nut in turn (about a quarter turn) to the stop (6). The amount of deflection of the traverse determines whether the achieved clamping force corresponds to the required one.

After installation, the fasteners (nuts and washers) must be additionally secured against corrosion.



Tips and recommendations for power thyristors:

The power thyristors should not be operated for long periods of time at their limit load for all parameters. In this case, the safety factor is determined by the required degree of reliability of the device.

Replace a failed power thyristor with a thyristor that matches the parameters of the one being replaced.

Supercooling must be provided when operating in an environment with an elevated ambient temperature.

Periodic cleaning of power thyristors and coolers to remove dust and contaminants is recommended to ensure proper heat dissipation.

Inductive current dividers (often twisted toroidal wire) should be used to equalize currents between power thyristors connected in parallel. The most popular connection methods are closed circuit, common coil circuit, or power thyristor. The efficiency of current dividers in this case is determined by the cross section of the magnetic wire.

Prevention of voltage unbalance when power thyristors are connected in series is achieved by using shunt resistors connected in parallel with each thyristor. Voltage equalization in transient conditions is provided by connecting capacitors in parallel to each thyristor.

Device under voltage

It is strictly forbidden to touch power thyristors under high voltage during operation.


icon Why choose AS ENERGITM

  • Own production facilities, including semiconductor silicon chips production
  • European brand - 100% quality, favorable price, short production terms
  • Over 20 years of experience in the semiconductor industry
  • Clients from more than 50 countries trust us
  • 20000 items in the product line for currents from 10A to 15000A, voltages from 100V to 9000V
  • We produce analogues of other manufacturers' products
  • Guaranteed certified quality, warranty period of operation - 2 years

 

Quality Warranty

Our products are certified and correspond to international standards.
Our company provides a quality guarantee for products of 2 years.
We provide certificates of conformity, reliability reports, data sheets and technical passports at the request of the customer.

Certificates

Each product is tested for the main parameters, and Test reports of the parameters for each product are provided.

Test Report

Geography of partnership

AS ENERGITM company manufactures and supplies power semiconductors to more than 50 countries around the world.

Geography

Logistics and Delivery

We deliver our products all over the world with the services of logistics companies: DHL, TNT, UPS, EMS, Fedex, Aramex.
Products can be delivered by any means of transport: air, sea, rail and road.

Logistics

AS ENERGITM Semiconductors Manufacturing

Our products range includes rectifier diodes, phase control thyristors in disc and stud design, avalanche diodes and thyristors, fast switching, high frequency thyristors, fast recovery, welding and rotor diodes, triacs, bridge rectifiers, power modules (thyristor, diode, thyristor-diode, IGBT), and air and water heatsinks to them.

Power diodes and thyristors are produced for currents from 10A to 15000A, voltage range from 100V to 9000V.
Power diode and thyristor modules are produced from 25A and up to 1250A, voltage range 400V - 4400V.
The range of power semiconductors also includes equivalent, replacement, analogue and alternative semiconductor devices of global manufacturers.


Featured Products:

 

Tags: heatsink, radiator, disc thyristor heatsink, scr heatsink 100A, heat sink for scr 150A, heatsink 160A, scr heatsink 200A, heat sink for scr 250A, scr heatsink 300A, heat sink for scr 320A, heatsink 400A, scr heatsink 500A, heatsink 600A, heat sink for scr 630A, scr heatsink 800A, scr heatsink 1000A, heat sink for scr 1250A, scr heatsink 1500A, heatsink 1600A, heat sink for scr 2000A, heatsink 2500A, scr heatsink 3000A, scr heatsink 3200A, heat sink for scr 4000A, scr heatsink 5000A, heat sink for scr 6000A, scr heatsink 6300A, diode heatsink, heatsink assembly, air heat sink for thyristor diode, air heatsink catalog catalogue pdf, heatsink price, air heatsink datasheet, certificate, manufacturing, technical specification of air heat sink radiator

 

Selected Products:

^